Technical data:
Statement of the BAC
0.00 – 0.40% BAC (the default setting of your device
is % BAC)
Accuracy
+/- 0.01% BAC (Blood Alcohol Concentration)
with reference to 0.05% BAC
Warm-up time
max. 30 seconds
Sensor
Semiconductor sensor
Response time
Within 10 seconds
Energy supply
2 pieces AA batteries (1.5V, LR6, Alkaline)
Dimensions of the device
46 x 110 x 20 mm
Weight
89 g (including batteries)
Ambient conditions
Operation: 0 – 40 °C
Storage: 0 – 50 °C
Calibration
After 1.000 tests or as soon as you see “CAL”
on the display. For a calibration service you
can send the device to ACE Instruments
(see www.ace-instruments.net).
WARRANTY AND LIABILITY
WARRANTY
ACE Instruments (ACE) provides
a warranty of two (2) years
after purchase for material and
processing errors for the product
(see attached warranty and
liability declaration) in all versions
and designations; and a warranty
of one (1) year for the sensor. This
warranty includes the electronics
as well as the casing or sensor
without sampling components.
Components that are inevitably
destroyed upon effectiveness
(such as fuses) are not part of
this warranty. The warranty is valid
from the date of delivery or from
the date of first activation (always
the shorter period), if not stated
otherwise in the accompanying
ACE Handels- und Entwicklungs
GmbH product literature.
Misuse:
OTHER APPLICATIONS OF,
OR MODIFICATIONS TO, THIS
BREATHALYZER CONSTITUTE
A MISUSE AND ENTAIL A RISK
OF PERSONAL INJURY AND/OR
DAMAGE TO THE DEVICE. ACE
SHALL ASSUME NO LIABILITY
FOR INJURY/DAMAGE CAUSED
BY MISUSE OF THE DEVICE. THE
DEVICE IS NOT INTENDED FOR
COMMERCIAL USE.
ACE SHALL NOT BE HELD LIABLE
FOR ANY DAMAGES THAT OCCUR
AS A RESULT OF ANY UNAUTHOR-
IZED MODIFICATIONS, REENGI-
Calibration:
To maintain the accuracy of the
breathalyzer, ACE recommends
a calibration after 1.000 tests or
as soon as you see “CAL” on the
display. For a calibration service
you can send the device to ACE
Instruments
(see www.ace-instruments.net).
The calibration is not mandatory,
but the accuracy of the breatha-
lyzer will decrease steadily
without it.
We recommend sending it as a
parcel, so that in cases of loss
an inquiry or proof of delivery
is possible.
Due to changes in the product,
the procedures stated can
change. This can take place
without prior notice or adaptation
of the operating manual and is
no cause for complaint, return
or price reduction. The user is
responsible for recognizing dis-
crepancies between the operating
manual and the actual handling of
the breathalyzer and must react
accordingly.
Battery Law notice (BattG):
The device associated with this
operating manual contains two
AA Alkaline batteries (1.5V) in
delivery condition. These batteries
are not made for recharging. The
use of rechargeable batteries is
not possible with this device and
can damage it. If the included
batteries are depleted, they
must not be thrown into the
household waste. Used batteries
may contain harmful substances
that can cause environmental or
health damage. Please return all
depleted batteries to electrical
appliance stores, who collect
them for free.
Battery exchange:
To replace depleted batteries
against new ones, first push the
battery cover down. Then replace
the depleted batteries with two
new ones. Be aware of the polarity
when inserting the new batteries
(+/- pole). Put the battery com-
partment cover on the rear panel
and push it gently down.
All depleted batteries will be
recycled. This way valuable
resources like iron, zinc and
nickel can be retrieved and are
reusable then. Battery recycling
is the easiest lesson in environ-
mental protection - so please
support it!
The shown garbage bins mean
that batteries must not be thrown
into the household waste.
The signs below the garbage bins
are acronyms for the chemical
substances inside the battery:
Hg:
Battery contains Mercury
Cd:
Battery contains Cadmium
Pb:
Battery contains Lead