Ace AC-2M-O-PTZ-20X-R, User Manual, Page: 15 / 37

5
About The Product
Dip switch settings
Before operating the camera, set the camera address, protocol, baud rate. The switches to
configure the address settings are located on back panel of the camera. Pic. 1 show the switches
on back panel. Default setting is address 1, baud rate 9600bps, protocol Pelco D.
Pic. 1: DIP Switches
To change the setting, follow the below steps:

Remove the switch cover;

Change the switch settings;

Fix the switch cover and make sure it is well sealed.
Below chart shows how to change camera’s address