Ace AC-2M-O-PTZ-20X-R, User Manual, Page: 10 / 37

About The Product
Functions
Soft Address
Camera address can be changed via calling specific presets.
Baud Rate and Protocol Self-adaptive
Camera can detect Pelco D and Pelco P protocols and 2400bps, 4800bps, 9600bps and 19200bps
baud rate automatically.
Set Camera Address, Baud Rate and Protocol
Every camera needs to have its own address, baud rate and protocol, the camera only responses
to the commands sent with the same settings, please refer to DIP settings for more information
about setting address, baud rate and protocol.
Proportional Pan
Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the
zooming times. At telephoto zoom settings, the pan and tilt speeds will be slower for a given
amount of joystick deflection then at wide zoom settings. This keeps the image from moving too
fast on the monitor when there is a large amount of zoom.
Auto Flip
When the camera tilts downward and goes just beyond the vertical angle, the camera rotates 180º.
When the camera rotates (flips), the camera starts moving upward as you continue to hold joystick
in the down position. Once you let go of the joystick after the dome rotates, joystick control returns
to normal operation. The auto-flip feature is useful for following a person who passes directly
beneath the camera.
Save/Call Preset
Preset function is that camera saves current horizontal angle and title angle of pan/tilt, zoom and
position parameters into memory. When necessary camera calls these parameters and adjusts
Pan/Tilt and camera to that position. User can save and call presets easily and promptly by using
keyboard controller or other controller. The camera supports up to 256 presets.
Zoom control
User can adjust zoom wide or tele by controller and get desired image.