![ACE PRODUCTS ACE-TL210 User Manual Download Page 22](http://html1.mh-extra.com/html/ace-products/ace-tl210/ace-tl210_user-manual_3884267022.webp)
22
automatically shut down until the ACE-TL210 wake up and opened the GPS.
4) set of historical data upload instructions
A, From 24-hour history:
Instruction Format: # 808 # user password # 24 # #
example: # 808 # 0000 # 24 # #
Note: When ACE-TL210 receiving the order confirmation user password is correct, return to sender
confirmation message: "START UPLOAD 24H HISTORY RECORD". Sent to the server while
starting the last 24 hours recorded historical data, format and GPRS mode "immediately upload the
current location of command" of the location information as shown, information in the state
prompted the STORAGE.
B, to read all data records:
Instruction Format: # 808 # 0000 # #
Description: When ACE-TL210 receiving the order to confirm the user password is correct, return to
sender confirmation message: "START UPLOAD ALL HISTORY RECORD". Also sent to the
server storage area began to record all historical data, format and GPRS mode "immediately upload
instructions current location," location information shown. Information in the state prompted the
STORAGE.
13. Low voltage warning
When the ACE-TL210 ’s working voltage lower than the set, to read the GPS information,
whether or not effective, immediately send the format as 4.1.6 location information to the three stored
numbers, the information state item automatically updates STATE: LP. Send a total of three times,
each time one minute interval.
14. ACC detect charge function
1) For Charge
Description: ACE-TL210 check the state of ACC of the power through the ACC Cable,so the ACC
ON when the car is moving, and the power of the car will recharge to the unit. and the ACC Off
when the car is parking, and the power of the car will not recharge to the unit.
2) The On/Off Command for ACC State
Open Command of ACC State : 091+ Password
Eg :0910000
Close Command of
ACC State : 090+ Password
Eg:0900000
Note: when ACE-TL210 receive the 091 command, and confirm the password is correct.ACE-TL210
will send a message to the sender what the content is "ACC STATE PROMPT:ON". when ACC is
ON/OFF
,
the ACE-TL210 will send the current position to the pre-saved numbers whether the GPS