9/
2
8
/20
22
ACE120
13
M.2 SSD
Step 1: Ensure the desktop is off, unplugged, and any potential energy is dissipated.
Step 2: Remove the side panel from the chassis as indicated in the “Chassis Cover” section of this
manual.
Step 3: Identify the M.2 SSD on the
motherboard, refer to Figure 1 for
additional help. Remove the Philips
screw using the PH1 or smaller bit
screwdriver, then pull straight back
in a parallel position to remove the
M.2 SSD from the slot on the
motherboard.
Reinstallation
Step 4: Gently slide the M2. SSD into
the designated slot, as noted in the photo above, and secure with the Philips head screw using a
PH1 or smaller bit.
Disposal:
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: The M.2 SSD
contains a printed circuit board of greater than 10 sq. cm and must be removed from the
device and must be disposed of, or recovered, in compliance with the requirements of Directive
2008/98/EC.
