8/
2
6
/20
22
ACE144
31
Step 6: Remove 1 Phillips screw on the opposite
side of the case.
Step 7: Pull out the DVD drive.
Reinstallation
Step 8: To reinstall the Optical Drive, follow the uninstallation steps backwards.
Step 9: Slide optical drive into the front drive bay in the desired
location.
Step 10: Insert (2) screws on the left side of the chassis (when looking
from the front) and (1) screw on the right side of the chassis (when
looking from the front).
Step 11: Reconnect SATA power header to optical drive from PSU and
SATA data cable from optical drive to motherboard. The suggested
header for the optical drive is SATA6G_3.
Disposal:
Selective Treatment/ Special Handling Per Annex VII, Directive 2012/19/EU: The optical
drive contains a printed circuit board of greater than 10 sq. cm and must be removed
from the device and must be disposed of, or recovered, in compliance with the requirements of
Directive 2008/98/EC.
