9/
2
8
/20
22
ACE130
30
Step 6: Remove 1-2 phillips screw on the opposite
side of the case.
Step 7: Pull out the optional drive bay expansion component.
Reinstallation
Step 8: To reinstall all add on optional expansion drives bays, follow the uninstallation steps
backwards.
Step 9: Slide optical drive into the front drive bay in the desired location.
Step 10: Insert (2) screws on the left side of the chassis (when looking from the front) and (1)
screw on the right side of the chassis (when looking from the front).
Step 11: Reconnect power header (most often SATA) to expansion bay component from PSU and
SATA data cable from expansion bay component to motherboard.
Disposal:
Selective Treatment/ Special Handling Per Annex VII, Directive 2012/19/EU: The optical
drive and I/O expansion drives contain one printed circuit board greater than 10 sq. cm
and must be removed from the device and must be disposed of, or recovered, in compliance with
the requirements of Directive 2008/98/EC.
