Wild West Manual
16
VI. Fault Analysis and Troubleshooting
Common Faults
Fault phenomena
Main cause
Corrective action
After the machine is
powered
on,
(the
power
supply
fan
works), but the display
is not on.
The monitor is not energized.
Please reconnect the power cable or replace it
with new.
The signal wire of the display is not connected or
damaged.
Please reconnect the signal wire or replace it
with new.
After the machine is
powered on, nothing
happens
and
the
screen is not lit.
The power supply is inconsistent with the
machine’s parameters.
Please check whether the power supply is
consistent with the machine’s parameters.
Fuse is burnt out.
Please replace the fuse.
The power supply is not connected.
Please confirm 110V~220V power supply is
connected and the power switch is on
The signal wire of the display is not connected or
damaged.
The signal wire of the display is not connected
or damaged.
The machine is not
powered on.
Check whether the input of the 110V~220V power
supply is right. The short circuit is not allowed.
Please check whether the voltage of the circuit
board inside the machine is abnormal.
The control panel is
not powered on
Check whether the output of 12V of the power
supply box is normal.
Please adjust the cable to the correct position.
The display has no
raster.
The cable of the display might fall off or be loosen
due to vibration.
Please check the power supply circuit or replace
the power line.
The display is not on..
Turn on the machine again manually.
The power is off on
the midway.
The circuit protector generates an action and the
power switch is turned off (Note: The circuit
protector cuts off the current when the abnormal
current flows).
Please turn on the power switch again. When
the circuit protector repetitively acts, it indicates
that the machine is abnormal. Please contact the
dealership.
After the product is
powered
on,
the
display is a white
screen without any
image or sound.
The host machine does not work.
Manually start the power start button of the host
machine.
The host power is bad or replaced.
The motherboard memory bank is bad or
replaced.
The motherboard is bad. Please contact
professional and manufacturer.
Shoot the target, but
no responds
Camera not in the correct position
Enter the Menu to adjust well the camera
position.
Camera damaged or the wiring loosed
Replace Camera or check the wiring.
The Gun Infrared damaged
Replace the Gun Infrared
