3
INSTRUCTIONS
6. Do not operate charger with damaged
cord or plug-have the charger repaired by
qualified personnel immediately.
7. Do not operate charger if it has received
a sharp blow, been dropped, or otherwise
damaged in
any
way. Take it to a qualified
personnel for inspection.
8. Do not disassemble charger; take it to
a qualified serviceman when service or
repair is required. Incorrect assembly may
result in a risk of electric shock or fire.
9. To reduce the risk of electric shock, unplug
charger from outlet before attempting any
maintenance or cleaning.
10.
!
DANGER
RISK OF EXPLOSIVE GASES.
a) Working in the vicinity of lead-acid
batteries is dangerous. Batteries
generate explosive gases during
normal battery operation. For
this reason, it is of the utmost
importance that each time before
using your charger, you read this
manual and follow the instructions
exactly.
b) To reduce risk of battery explosion,
follow these instructions and
those published by the battery
manufacturer and the manufacturer
of any equipment you intend to use
in the vicinity of the battery. Review
cautionary markings on this product
and on engine.
1.
SAVE THESE INSTRUCTIONS
- This
manual contains important safety and
operating instructions for battery charger
model I-7005T.
2.
NEVER
expose this device to rain, snow,
fog, or high humidity.
3. Use of an attachment not recommended or
sold by the battery charger manufacturer
may result in a risk of fire, electric shock,
or injury to persons.
4. To reduce risk of damage to electric plug
and cord, pull by plug rather than cord
when disconnecting charger.
5. An extension cord should not be used
unless absolutely necessary. Use of
improper extension cord could result in a
risk of fire and electric shock. If extension
cord must be used, make sure:
a) that pins on plug of extension cord are
the same number, size, and shape as
those of plug on charger;
b) that extension cord is properly wired
and in good electrical condition; and
c) that the wire size is large enough for the
AC ampere rating of charger.
MINIMUM AWG WIRE SIZE FOR EXTENSION
CORD FOR THIS BATTERY CHARGER
AC input
AWG size of cord, Length of cord, m
Current I, A
25
50
100
150
0 ≤ I < 2
18
18
18
16
2 ≤ I < 3
18
18
16
14
3 ≤ I < 4
18
18
16
14
4 ≤ I < 5
18
18
14
12
5 ≤ I < 6
18
16
14
12
6 ≤ I < 8
18
16
12
10
8 ≤ I < 10
18
14
12
10
10 ≤ I < 12
16
14
10
8
12 ≤ I < 14
16
12
10
8
14 ≤ I < 16
16
12
10
8
