ACDC KF-20DW/ZCDC12V User Manual Download Page 6

ACDC 12V Air Conditioner 

Cool Air While Keeping the Earth Clean  

 

 

Otherwise, it could indicate that pressure leakage may have occurred during the transit. Contact 
customer support for the troubleshooting. 

2.3

 

Connect Outdoor and Indoor Unit 

Connect the indoor and outdoor units by the rubber hoses. The low pressure hose is bigger in 
diameter than the high pressure hose. Route all hoses and electrical wire through the opening 
hole. A round hole with a diameter of 65mm is recommended for the opening hole. Attach the 
retaining wall covers and sealing mud block to protect the hoses from sharp edges. Air purge 
and vacuum the refrigerant hoses before commissioning the pre-filled R-134a for the first time. 
Open the high pressure valve first, then the low pressure valve. Consult the local HVAC 
specialist for the technical support.   

2.4

 

Connect Batteries 

A 12V battery is required to operate ACDC air conditioner. The power cable with in-line 
fuse protection connects the outdoor unit and the battery. The battery can be placed in 
the outside battery box or inside luggage compartment

.  

 

 

Summary of Contents for KF-20DW/ZCDC12V










Reviews: