MAX_Kurzanleitung_Brief_Overview_V1.03_de_en
86 / 105
27.5.6.2 DC/AC converter
The DC/AC converter installed in this mobile workstation converts the 12 V DC (direct current ) into a 230 V
AC/50 Hz sinusoidal alternating current.
The status LED on the illuminated socket switch indicates whether the DC/AC converter is working correctly.
If the status LED does not light up, the converter has switched off due to a fault such as over/undervoltage,
overloading or overheating. For further error codes or explanations, please see Remedying Malfunctions in
the power inverter manual.
27.5.6.3 Battery controller
The battery controller installed in this mobile workstation allows you to monitor the residual capacity of the
batteries. It is located on the front next to the On/Off switch.
Figure 29: Battery controller MAX Li-Ions
The display of the battery controller is permanently active, regardless of whether the mobile workstation is
switched on. The battery capacity is given in percentage figures.
After switching off due to overloading or overheating, the converter attempts to switch on again
automatically. The time up to automatic switching on again can range from a few seconds to a
number of hours.
This is why it is important during work on the electrical system or the consumers to disconnect
the converter from the battery using the On/Off switch, unplug the low-power cable of the charger
and unplug the battery tray connection cable.
WARNING
Summary of Contents for MAX Series
