background image

 

M2Smart

®

SE_Set_Brief Overview_V1.02_en_es_fr 

14 / 32 

4.2.9  Technical Data M2UHF-RFID Midrange 

The table below includes the technical data for the M2UHF-RFID Midrange plug-in module. 
 

 

Technical Data 

Housing 

ABS/PC 

Protection class 

IP54 

Operating 
temperature 

-20 °C to 50 °C/-4 °F to 122 °F 
Condensation of the device must be avoided. 

Storage temperature 

-20 °C to 60 °C/-4 °F to 140 °F 

Rel. humidity 

5 % - 90 % non-condensing 

Device dimensions 

52 x 85 x 27 mm (L x W x H) 

Weight 

58 g 

Interfaces 

Plug for connection to the main device 

Frequency range EU 

865.7 to 867.5 MHz 

Frequency range 
USA and Canada 

902.75 to 927.25 MHz 

Read range 

Up to 6 meters 

Antenna type 

Integrated Linear Polarized 

RFID protocols 

EPCglobal UHF Class 1 Gen 2 
ISO 18000-63 (formerly 18000-6C) 
DRM (Dense Reader Mode) support 

Output power EU 

0 dBm until +27 dBm 

Output power  
USA and Canada 

0 dBm until +26.5 dBm 

 

4.2.10  FCC Statement of Compliance 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause interference. 
(2) This device should accept any interference, including interference that may cause undesired operation of 
the device. 
 

4.2.11  IC Statement of Compliance 

This  device  contains  licence-exempt  transmitter(s)/receiver(s)  that  comply  with  Innovation,  Science  and 
Economic  Development  Canada’s  licence-exempt  RSS(s).  Operation  is  subject  to  the  following  two 
conditions: 
(1) This device may not cause interference 
(2) This device must accept any  interference, including interference that may cause undesired operation  of 
the device. 
 

4.2.12  RF Exposure 

This equipment complies with FCC and IC SAR exemption limits at a minimum separation distance of  
50 mm from the Antenna of this module. 

Summary of Contents for M2Smart SE

































Reviews: