M2SmartSE_Set_Brief Overview_V1.11_en_fr
28 / 63
CAUTION
The M2UHF-RFID Midrange attachable module can become very
hot during extended operation. To protect persons and the
module, the maximum time of a scan is limited to two minutes.
9.5.2.3
Handling
After the M2UHF-RFID Midrange attachable module has been plugged into the main device on the upper
plug-slide mechanism, it can be used for reading UHF-RFID tags.
To do this, start a software application to initialize the module. Then the read process can be carried out with
the software application.
9.5.2.4 Technical Data M2UHF-RFID Midrange
The table below includes the technical data for the M2UHF-RFID Midrange plug-in module.
Technical Data
Housing
ABS/PC
Protection class
IP54
Operating
temperature
-20 °C to 50 °C/-4 °F to 122 °F
Condensation of the device must be avoided.
Storage temperature
-20 °C to 60 °C/-4 °F to 140 °F
Rel. humidity
5 % - 90 % non-condensing
Device dimensions
52 x 85 x 27 mm (L x W x H)
Weight
58 g
Interfaces
Plug for connection to the main device
Frequency range EU
865.7 to 867.5 MHz
Frequency range
USA and Canad
902.75 to 927.25 MHz
Read range
Up to 6 meters
Antenna type
Integrated Linear Polarized
RFID protocols
EPCglobal UHF Class 1 Gen 2
ISO 18000-63 (formerly 18000-6C)
DRM (Dense Reader Mode) support
Output power
0 dBm until +27 dBm
10 Instructions for Cleaning and Care
Clean the Mobile Handheld Computer by setting it down on a surface (e.g. table). This way, you can hold it
securely and the Mobile Handheld Computer cannot slip out of your hands during the cleaning process.
CAUTION
Do not use any corrosive chemicals, cleaning solutions or strong
cleaning agents in order to clean the Mobile Handheld Computer,
battery and docking station.
ATTENTION
All components must be disposed of properly at the end of their
technical lifetime.
