accutone USB converter - installation guide & user manual
13
14
By default, the Skype program will use Windows Default Device as it’s audio input and
output channel. This can either mean it is using your default Sound Card, or whichever
audio device you’ve setup in Sound Devices inside the Control Panel.
We will need to change the device to the Accutone USB
headset. First, make sure you have the USB500 headset
plugged in, and the driver properly installed as shown in
the previous sections.
Open the Skype program, under Tools menu, select
Options, and the following screen will open up.
Select Sound Devices in the left panels. On the right panel, open up the Audio In drop-
down menu and you should see Accutone USB Sound Device, select it. Do the same for
the Audio Out selection.
The next screen will show you
installation details, like destination
folder and user information.
Click
to continue installation.
Install
After a few minutes of copying files,
this screen will pop up indication the
successful completion of Accusound.
Click
to exit installer.
Finish
Please read carefully the End-User
Licence Agreement for Accusound.
“I accept the terms in the
license agreement”
Click
to continue installation.
Select
next
C3. setup sound devices in the Skype program
Installation
[ inspiring people, inspiring change ]
Note: In some cases, the driver may read USB Audio Device, select it anyways. However you should uncheck
the Let Skype Adjust My Sound Device Settings, as the Windows default driver may cause microphone cut-off
during Skype talk. (Do not worry about this if you are using the Accutone USB driver.)
C
Installation
operating digital audio controller
operating the sound configuration software
TM
operating the Accusound software
Software installation.
