part a. getting comfortable.
Hooking all the parts together!
A.2
Hooking all the parts together!
A.2
5
4
A.2.1 Connect to Telephone
Note that all connections jacks are located at the bottom of the unit. Flip over
the amplifier, unplug the handset cord from your telephone base unit and
insert it to the
Modular Jack for Telephone Handset (12)
. Then, use the
phone cord provided with RJ-11 modular plug at both ends to connect the
control unit to your telephone. Plug one end of the cord to your base unit
(A)
and the other end to the
Modular Jack for Input from Telephone Unit
(11)
at the back of the unit.
A.2.2 Connect to Telephone Headset
One thing you will notice right away is that A30 Amplifier comes already
installed with a cable connected to the bottom of the amplifier, specifically to
the
Modular Jack for Telephone Headset (15)
. The other end of the
cable is a
Quick Disconnecting Cable (QD)
plug, as illustrated below.
To connect to any Accutone telephone headset, disconnect the QD on your
headset, and connect the top half of your headset cable to the QD cable
extended from the amplifier. Please note that this quick disconnector is
specially designed for users who are always on the move, by allowing users
to quickly connect and disconnect to the device.
* For pairing the A30 amplifier with non-Accutone headset, you must unplug the entire cable from the
modular jack (15) and connect it with the telephone headset’s standard modular jack.
We do not
recommend such pairing
, as not all telephone headsets match the standard A30 configuration.
A
11
connection & preparations.
connection & preparations.
12
QD
15
