AccuTemp STX-AT-EK, Instructions Manual

Page: 10 / 16

- 8 -
4. When the kettle is removed from the base, the base will turn off.
Once the kettle is placed back on the base, you can select the
desired setting again and the blue light will illuminate and start
blinking again. This reactivates the enhanced keep warm mode. The
kettle will then reheat to the designated temperature if necessary.
This function will continue for up to 30 minutes.
5. To turn off the unit, press the blinking button.
BOIL DRY PROTECTION
As a safety feature, this kettle is designed to automatically turn off when
insufficient water has been kept in the kettle. This feature is designed to
prevent overheating of the appliance. When this feature is triggered the
unit is designed to shut off. To reset the unit, unplug the unit from the wall
outlet. Allow the kettle to cool completely. Once the kettle has cooled,
refill the kettle to the correct level with water and plug the unit back into
the wall socket. The safety boil dry protection will automatically reset.
FILTER
The kettle has a removable filter just inside the lid by the spout. The filter
can be removed to clean with hot water and soap. Do not run the filter
through the dishwasher.
To properly insert the filter, place the filter in as shown in the picture
below.