AccuTemp EGD Series S/N 7547, Installation & Owner'S Manual

Page: 15 / 50

Accu-Steam™ Installation and Owners Manial
MP5004-1202
PAGE 14
NEMA 6-50R
NEMA 15-50R
NEMA L16-30R
INSTALLATION
This appliance must be properly grounded, In accordance with all the National, State and
local electrical codes.
WARNING
ELECTRICAL SUPPLY
The A
CCU
-S
TEAM
™ griddle has been designed, manufactured and tested to meet or exceed
the demanding standards of safety set forth by Underwriters Laboratories, Inc. To ensure that
this high level of safety is maintained in your installation, it is important that you read and
understand the following information before attempting to plug in your griddle.
ELECTRICAL REQUIREMENTS
Electrical requirements are listed on the data plate located on the right side of the unit, near the
front. All standard AccuTemp griddles are supplied with a 6ft (1.83m) cord and the appropriate
UL listed plug. Please note, that the plug is rated for 250VAC. This plug is commonly used for
both 208VAC and 240VAC installations. Make sure that the voltage at your supply receptacle
is within ± 10 % of the voltage listed on the griddle data plate. Connection to any other voltage
may cause damage to components in the griddle and damage of this type is not covered under
warranty.
GROUNDING INSTRUCTIONS
Grounding provides a path for electric current to reduce the risk of shock. This product is
equipped with a power cord having a grounding conductor and a grounding plug.
ELECTRICAL CONNECTIONS (MODEL EGF ONLY)
The receptacle requirements vary between models.
If you have purchased a 240 V single-phase model, you will need a NEMA 6-50R
receptacle. If you have purchased 208/240V a three-phase model, you will need a NEMA
15-50R receptacle and if you purchased a 440V/480V three-phase model you will need a
NEMA l16-30R receptacle
These receptacles are configured as shown below.