AccuSport Vector Pro, User Manual, Page: 12 / 60

Vector Pro User Guide v2.1 Page 12 October 2008
pointing arrow next to the percentage (%) display till it reads 100
percent (%)
10)
In the bottom right corner of the page select Apply and then OK.
11)
The previous Power Options Settings page is now displayed, select the
Save Changes key.
12)
Exit the final Power Options window by clicking the Red –“X” button to
complete your set-up.
13)
Turn Vector Pro Off
14)
Restart the Computer
Disabling User Account Control (Windows Vista)
If you encounter a problem during or after the software installation, we
recommend disabling the User Account Control to prevent the Windows
Vista Operating System from blocking the Vector Pro software and
preventing it from launching, or causing an error message on opening
the application.
1)
Left Click on the Start Button (Vista Windows Symbol)
2)
Left Click on Control Panel
3)
Left Click on User Accounts (If you cannot see a "User Accounts" Icon
click on the "Classic View" link in the left hand column of the
window, then repeat the first part of step 3)
4)
Left Click on Turn User Account Control On or Off
5)
Uncheck the User Account Protection checkbox
6)
Click on OK
7)
Left Click on Yes to Restart the computer
Please call Accusport Customer Support (336) 759 3300 x2, or e-mail
support@accusport.com, if any problems are encountered while
following this procedure. Note: Some versions of Vista do not allow for
users to disable the User Account Control.