AccuSport Vector Pro, User Manual, Page: 11 / 60

October 2008 Page 11 Vector Pro User Guide v2.1
o
Select the plus (+) sign next to the Sleep label
ƒ
Select the plus (+) signs next to “Sleep After,” and set all
displayed “Minute” fields to read Never or Off by holding
down the left mouse button on the down pointing arrow
next to the minute numerals until the “Minutes” display
reads “Never” or “Off”
ƒ
Select the plus (+) sign next to “Allow Hybrid Sleep,” and
set all displayed “Minute” fields to read Never or Off by
holding down the left mouse button on the down pointing
arrow next to the minute numerals until the “Minutes”
display reads “Never” or “Off”
ƒ
Select the plus (+) sign next to “Hibernate After”, and set
all displayed “Minute” fields to read Never or Off by
holding down the left mouse button on the down pointing
arrow next to the minute numerals until the “Minutes”
display reads “Never” or “Off”
8)
Select the plus (+) sign next to the USB settings label.
o
Then, select the plus (+) sign next to the “USB selective suspend
setting” label.
o
Ensure both fields read Disabled. If they do not, select the down
pointing arrow for each field , in turn, and select “Disabled”
9)
Select the plus (+) sign next to the Processor Management label
o
Then, select the plus (+) sign next to the “Minimum Processor
State” label
o
Change settings for the “On Battery” and “Plugged In” labels to
100 percent (%) by holding down the left mouse button on the up
pointing arrow next to the percentage (%) display till it reads 100
percent (%)
o
Then select the plus (+) sign next to the “Maximum Processor
State”
o
Change settings for the “On Battery” and “Plugged In” labels to
100 percent (%) by holding down the left mouse button on the up