background image

Whenever the stopwatch stops running, the "STOP" indicator will be ON.  Press the button [START/STOP] to
start the stopwatch.  As it runs, the current elapsed time is shown on the lower line.

To view the current split / lap time, you can press [LAP/SPLIT].

The number of split/lap times is shown on the upper left corner. The corresponding split and lap times are
displayed on the upper and middle line.   Press [LAP/SPLIT] again, the next split/lap time will be shown and
the number of split/lap time is updated.

The stopwatch (Model 790M & 790MDEC) can store up to 500 split / lap times. The split/lap times can be
stored into the memory as you press [LAP/SPLIT] to view the current split/lap time.  Meanwhile, the lap and
split time will be frozen for 5 seconds.  After this 5-second period, the lap and split time will return to normal.

In addition, the fastest lap, the slowest lap, and the averages of all laps will also be recorded. As you press
[STOP] to stop the chronograph, the last lap/split time will also be stored (provided that the last lap/split time
is not the first lap/split time).

When there are 5 free memories left, the icon "FULL" will blink to remind you of the nearly full situation.
Whenever the storage is full, extra split/lap times will not be stored into memory but will still be shown on the
display.  Any fastest and slowest laps will not be stored. The memory counter will flash as the extra split/lap
times are being displayed. The icon "FULL" will be steadily ON.

The maximum memory counter value is 100 or 500.

0: 00' 00" 

00

0: 00' 00" 

00

0: 03' 35"

 52

SPLIT

LAP

RUN

0: 10' 43" 

35

0: 10' 43" 

35

0: 10' 43"

 35

SPLIT

LAP

RUN

0: 15' 10" 

94

0: 04' 27" 

59

0: 15' 10"

 94

SPLIT

LAP

RUN

{000}

{001}

{002}

6

Summary of Contents for AE760M






















Reviews: