23
6.7.3 Factory Reset
If the User wishes to return the configuration of the Viewfinder
to a known default state, the Factory Default configuration may
be selected.
•
Rotate then press the MENU control to select Factory
Reset within the Diagnostics Menu
A dialogue box ‘Are you sure?’ (Figures 6 and 7) appears,
because invoking a Factory Reset permanently erases all
previously stored setups.
Factory Reset also overwrites previously stored analogue
video input offset adjustments with default values. For
correct operation, user adjustment of these is required
after Factory Reset.
•
Rotate then press the MENU control to select YES to
continue with a Factory Reset, or to select NO to return to
the Diagnostics Menu
6.8
Configuration Menu
Display modes and Viewfinder orientation are selected within
the Configuration Menu (Figure 14).
<Config>
Top
Display Mode
Î
Colour
Action
Mono
PsF
I
Monitor Y
Wide
Rotate Image
P:
0
C:
-1.0
B:
0
Figure 14 Configuration Menu
•
Rotate then press the MENU control to select ‘Colour’ for
default colour video image mode
