3 eye chronograph
with day and date
* Do not attempt to set the day between 11.15 PM and
6.00 AM as the day/date change cycle is already in
progress.
* The chronograph measurement can time up to 4
hours, 59 minutes and 59 seconds.
Please refer to the previous chronograph sections
for function. Note that the ‘split time measurement’
function is not included for the ‘3 eye chronograph
with day and date’.
2 eye and 3 eye chronograph
with date
Using the stop watch/chronograph fea-
ture continued:
•
Split time measurement:
1. Press ‘A’ to start the timing, then press ‘B’ to
split the timing.
2. Press ‘B’ to release the timing as many times
as required.
3. Press ‘A’ to stop the chronograph timing.
4. Press ‘B’ to reset the chronograph.
2 eye and 3 eye chronograph
with date
Using the stop watch/chronograph
feature:
* The chronograph measurement can time up to 60
minutes.
•
Standard measurement:
1. Press ‘A’ to start the chronograph timing, then
press ‘A’ to stop the timing.
2. Press ‘B’ to reset the chronograph.
•
Accumulated elapsed time measurement:
1. Press ‘A’ to start timing, then press ‘A’ to stop
the timing.
2. Restart the timing by pressing ‘A’ as many
times as required.
3. Press ‘A’ to stop the chronograph and ‘B’ to
reset.
3 eye chronograph
with day and date
Setting the time:
1. Pull the crown out to position ‘3’ and adjust the
hands to the desired time.
2. Push crown back to position ‘1’.
Setting the date:
1. Pull the crown out to position ‘2’.
2. Turn the crown anti-clockwise to set the date.
3. After the date has been set push the crown
back to position ‘1’.
* Do not attempt to set the date between 9:00 PM
and 1:00 AM as the date change cycle is already in
progress.
Setting the day:
1. Pull the crown out to position ‘2’ and turn the
crown clockwise until the desired day is set.
2. After the day has been set, push the crown
back to position ‘1’.
2 eye and 3 eye chronograph
with date
Setting the time:
* The chronograph measurement must be stopped
before the time can be set.
1. Pull the crown out to position ‘2’.
2. Turn the crown clockwise until the previous
date is displayed.
3. Now pull the crown out to position ‘3’ and
adjust the hands to the desired time.
4. Push crown back to position ‘1’.
* Do not attempt to set the date between 9:00 PM
and 1:00 AM as the date change cycle is already in
progress.
GUARANTEE
DATE OF PURCHASE:
Retailers stamp if required or full name and address:
Please attach the receipt or proof of purchase; failure to
attach these may invalidate this Guarantee.
This Guarantee does not affect your statutory rights.
IA03/12-2014
A
B
1 2 3
MIN
REMOTE
SEC
CHRONOGRAPH
SECONDS
HOUR
Accurist_IA03_New_SpotColour.indd 7-12
26/10/2016 11:49
