Complete your slide order for model 115RC by specifying
the following:
Qty P/N
Length
Total Tracks
2 ea. AL0115
0120RC
Qty
Carriage type
Total Ball Carriages
2 ea. SS0115-CASSRC
Qty P/N
End Stop Kits
2
AL0115-STOPRC
Drilling Jig
DZ0115-DJIGRC
Made to order –
Locates holes
to pin multiple lengths of track
together.
Easy-Close Kit
CB115-ECRC
Includes mechanism and Slows movement at end
engagement pin plate.
of travel
Fasteners not included.
Nuts and Washers
4180-0757-XE
for individual carriages
• 2 ea. M5 5/8" barrel nuts
• 2 ea. Star Washers
Hardware Kit with
4180-0756-XE
Polymer Carriages
• 2 ea. CB0115-CASSRC
• 2 ea. AL0115-STOPRC
• 4 ea. M5 5/8" barrel nuts
• 4 ea. Star Washers
Hardware Kit with
4180-0746-XE
Stainless Steel Carriage
• 2 ea. SS0115-CASSRC
• 2 ea. AL0115-STOPRC
• 4 ea. M5 5/8" barrel nuts
• 4 ea. Star Washers
NOTE:
Specifications, materials, prices, and terms and
delivery are subject to change without notice.
Copyright © 2018 Accuride International Inc. 3700-9545(1246)-MK973-R5-0518
AL0115-0120RC
47" [1.2m] Aluminum track (x1)
without pre-drilled holes
AL0115-0120RCH
47" [1.2m] Aluminum track (x1)
with pre-drilled holes
AL0115-0240RC
94" [2.4m] Aluminum track (x1)
without pre-drilled holes
AL0115-0240RCH
94" [2.4] Aluminum track (1x)
with pre-drilled holes
SS0115-CASSRC
Carriage – Stainless Steel Balls (x1)
CB0115-CASSRC
Carriage – Polymer Balls (x1)
AL0115-STOPRC
Aluminum End Stop (1 stop + 2 screws)
Figure 7
Tracks and carriages are packaged and sold singly.
Fasteners are not included with track. For each
complete span of track, order two End Stop Kits
(AL0115-STOPRC).
Optional accessories
Order example
Optional Easy-Close Mechanism Installation
Components
The optional Easy-Close kit (CB115-ECRC) consists of two
components, the mechanism housing and the engagement pin
plate (Figure 7).
4.13 [105.0]
.17 [4.4] Ø x .33 [8.4] x 90° CSK
.89
[22.5]
2.07
[52.5]
.20
[5.2]
.94
[24.0]
.06
[1.6]
.47
[12.0]
1.49
[37.9]
.43
[11.0]
.16
[4.0]
.59
[15.0]
.93
[23.5]
.69
[17.5]
1.77
[45]
2.36 [60.0]
5.9 [150]
6.89 [175]
• The 115RC Easy-Close device can be installed at the
beginning and end of the track to dampen motion at either end
of the travel distance.
• A 3-lb. pull force provides resistance akin to a hold-in detent,
holding components in place at the end of travel.
• Maximum load capacity is 44 lbs. [20kg]. This is based on
a side-mounted track with one ball carriage suspending
weight.
Applications should be tested to ensure the best
performance.
1. Using M4 [4mm] countersunk screws, mount the mechanism
housing adjacent and parallel to the track. The distance from
the centerline of the track to the centerline of the mechanism
holes should measure 1.75" [44.5 mm]. The distance of the
mechanism from the end of the track is determined by the
location of the end stop (Figure 8).
Figure 8
5.9
[150]
1.75
[44.5]
5.9
[150]
1.75
[44.5]
3
2. Install the engagement plate to the threaded studs of the ball
carriage. This places the pin in the correct position to engage
the Easy-Close action.
NOTE:
If using multiple Easy-Close devices in multiple tracks
together, be sure they are aligned to one another to
ensure proper operation.
Packaging & Ordering
For the most current technical information visit
www.accuride.com
Accuride International Inc.
12311 Shoemaker Avenue
Santa Fe Springs, CA 90670
TEL (562) 903-0200
FAX (562) 903-0208
Manufacturing, Engineering, and Sales
United States • Germany • Japan •
Mexico • United Kingdom • China
WARNING: This product can expose you to chemicals including nickel,
which is known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to www.P65Warnings.ca.gov.
