16
Step 4
Operating the TENS unit
Once gel pads are securely
placed on the skin, the
TENS unit is ready for use.
1. To power on the unit,
press and hold the “
+
”
button for 3 seconds
until you hear a mildly
audible long beep.
2. Use the “
+
” button and the “
–
” button to adjust
the intensity to a comfortable level.
NOTE:
There
are 15 levels of intensity. Each time you press
the “
+
” button or the “
–
” button, you will hear a
mildly audible short beep indicating the intensity
level has changed.
If the stimulation level becomes uncomfortable,
press the “
–
” button to decrease the intensity to
a comfortable level.
3. To power off unit, press and hold the “
–
” button
for 3 seconds until you hear a mildly long beep.
NOTE:
The unit will automatically power off after
the 20 minute treatment is complete.
PLEASE NOTE:
n
If the continuous beeping persists, please check
if the pads are adhered well to your skin.
n
Do not move the gel pads to another part of
your body without turning off the power first.
n
Never stick the gel pads to each other.
n
Keep the gel pads clean and do not expose to
heat or direct sunlight.
n
If the gel pads do not adhere to your body or are
dirty, wipe with a damp, lint-free cloth. Do not
clean adhesive gel pads with any chemical.
n
Place the gel pads on intact skin only. Do not
place on cuts or damaged skin.
n
The AccuRelief™ Mini TENS is for single
person use only. Do not share device with others.
n
Place the gel pads on the protective transparent
film when not in use.
Summary of Contents for MiniTENS ACRL-1000
Page 13: ...13 PRODUCT STRUCTURE Mini TENS Back of unit Front of unit ...
Page 31: ......
