ProPanel-HD (FW4), Revised August 2020
Page 7 of 24
Initial Set-up
In most instances, the initial parameters such as a reference point, measurement units,
and resolution will be factory set.
(See page 2 for these.)
UNITS: To change the measurement units, press the UNITS Key.
The readout will cycle thru:
•
Decimal Inches
•
Fractions
– 16ths of inch
•
Fractions
– 32
nd
of inch
•
Fractions
– 64
th
of inch
•
Millimeters (or centimeters if enable)
DATUM:
Close the jaws together and verify the readout shows zero. Press the DATUM
key if needed. The keypad can be locked if desired; this prevents accidental presses of
the PLUS, MINUS, or DATUM keys from affecting accuracy.
CUSTOMIZE: Many operations/features of the ProPanel system can be configured to
suit best way you will use the gage. See Programming Mode section for details about
the numerous controls/settings available.
