Manual Part # 800-1070-001, Rev G, 10-2008
Page 4 of 16
S
ECTION
1
G
ENERAL
I
NFORMATION
Introduction
Digi-Stop is a complete digital stop and fence system for chop saws, radial arm
saws, and miter saws. It is the consumer model of Accurate Technology’s
ProStop™ Stop & Fence System. The readout has easy-to-use front panel
keys for calibration, incremental measurements, and changing of
measurement units. User selectable resolution will display fractions in 16ths,
32nds, or 64ths; inches as .01 or .001, and millimeters as .1 or .01. The system
is powered by two AA alkaline batteries. It is immune to dirt, sawdust or other
non-conductive contaminants making it the ideal choice for woodshops and
other dusty environments.
What This Manual Includes
This manual includes information for:
Digi Stop-4
Part Number:
903-6004-020
Digi Stop-8
Part Number:
903-6008-020
Digi Stop-10
Part Number:
903-6010-020
Digi-Stop Specifications
Measuring Range
52, 96 inches or 116 inches
Accuracy:
+ .015inch
Resolution
.1inch
.1mm
or
.01inch
.01mm or
.001inch .01mm or
1/16, 1/32 or 1/64 inch
Repeatability:
.001inch or .01mm
Readout Range:
+ 999.999 in; + 399 63/64 in; + 9999.99 mm
Operating Temp:
32 to 120
°
F
Max. Slew Rate:
60 inches/sec. (1500 mm/sec.)
Encoder:
12 inch six-conductor cable terminated by RJ12
connector.
Dimensions:
Available at on request.
Warranty:
One year from date of purchase.
