Copy Right. Hunan Accurate Bio-Medical Technology Co., Ltd
Page 12 / Total 29
4.3 Review
1. Measurement interface → Press the Confirm key to enter the interface →
Main menu → Review;
2. Display abnormality data in the measurement process.
4.4 Report
After the device continuously monitors SpO
2
and PR for some time, the software
will automatically generate a report according to the measured data for view by user.
For example, the device can provide long-time monitoring during sleep, and the
software will summarize and generate a sleep report according to the measured SpO
2
and PR for user to view and know the measured results.
Note: The report is for reference only and cannot be used as a basis for
treatment.
4.5 Battery Level Detection
The device automatically monitors the battery level, and displays and updates it
on the display screen. When the battery level is displayed as
, please charge
the battery timely.
4.6 Transmission via Bluetooth
Turn on Bluetooth on your smart phone; launch the specific application to connect
the device so that you can upload data via Bluetooth.
▲
Note: This device only support Bluetooth Protocol 4.0 and higher version.
4.7 Data Transmission
In USB mode, the PC can correctly display data files saved during measurement,
and such files can be copied to the PC.
4.8 Measurement Duration
Turn on the SpO
2
main unit and connect the probe; insert your finger into the
probe and start measurement. The main interface displays 00:00:00; when a value is
obtained, it will update the measurement time in real time. Unplug the probe, the
measurement time will continue accruing until the main unit can no longer receive
detection data, and then it will stop automatically.
4.9 Main Unit State Indication
When the probe is not inserted after the SpO
2
main unit is turned on, the state
indication is “No Senser”;
