with the battery type you set up. The
example shows the battery pack of NiMH,
12cells and 3000mAh of capacity.
Set up the charge current for manual
charge mode, or the current limit for
automatic charge mode. Each mode can
be switched by pressing INC and DEC
button at the same time when the current
field is blinking.
Setting up discharge current and final
voltage.
Setting up the sequence of charge and
discharge, and the cycling number.
Saving the data.
Load Data Program
This program calls back the data that was stored at “Save
Data’program.
To load the data, press Start /Enter key once to blink the data
number field and select the number using INC or DEC key then
press Start /Enter key for more than 3 seconds.
Select the data number to be called back.
The data matched with the number will be
displayed at this time.
Loading the data.
