HDG-4000 ANALOG/DIGITAL VIDEO CALIBRATION GENERATOR HDG-4 USER MANUAL
9
On Screen Display (OSD) Systems
Pattern Information
Info
– Each time a pattern is changed the name of the pattern, which includes important signal
identification information, is displayed on-screen for approximately one second. Press the Info button to
display the pattern information continuously. Press the Info button again to resume the default display
period.
OSD Menu System
The OSD Menu is produced by all analog and digital outputs, for all signal formats. The OSD Menu
provides additional features such as user definable grayscale values and colors, access to advanced
signal parameters, communications port control, and the ability to specify generator power-up default
modes.
OSD Menu Navigation
Press the Menu button to display the OSD window, which is organized into three columns. The left
column of the OSD window currently lists six menus – User Level, Output, Sync, Misc, Com Ports, and
Defaults. Use the cursor keys to highlight the desired menu, and then move into the middle column and
highlight a menu item. The current status of each highlighted item is shown in the right column. To
change a setting move into the right column and highlight one of the alternative settings that will be
listed in that column. In most cases it is not necessary to press the Enter key unless “Enter” appears in
the right column. In that case highlight “Enter” and press the remote control Enter key to proceed.
Press Menu to turn the OSD menu on or off. The cursor position in the OSD menu is maintained when
the menu is turned on or off, so it is easy to turn the menu off when making measurements or adjusting
a calibration setting, and then turn it back on again to change the same menu item.