Security Class
Storage and Transportation
The infrared thermometer has been tested and conforms to the
standard ASTM E1965-98. ASTM laboratory accuracy
requirements in the display range of 96.8°F to102.2°F (36°C-39°C)
for ear canal IR thermometers is ±0.4°F (±0.2°C). Note that for
mercury-in-glass and electronic thermometers, the requirement
per ASTM Standards E667-86 and E1112-86 is ±0.2°F (±0.1°C).
The thermometer can be transported using general transportation
tools. Severe vibration, shock, or rain must be avoided during
transportation.
The thermometer must be packaged and then stored in a
well-ventilated room without corrosive gas. The ambient
temperature must be between –20°C and +55°C
（
-4°F–131°F
）
,
the relative humidity must be lower than 95% (non-condensing),
and the atmospheric pressure must be 50–106 kPa.
Type of protection against electric shock: internally powered
equipment.
Degree of protection against electric shock: Type BF applied
part.
Degree of protection against ingress of water:IPX0
Safety degree of using in flammable anesthetic gas blending
with air, oxygen or nitrous oxide: Non-AP/APG
No application parts of the thermometer prevents defibrillation
charge effect.
No application parts of the thermometer output signal.
The thermometer is impermanent installed device.
24
Summary of Contents for AC-AT2108
Page 2: ......
