AccuLine TNplus 1000m, User Manual

Page: 21 / 86

-18-
5.7 Audible alarm mute function:
If the audio alarm during the battery mode is too annoying, it can be
muted by ON tton continuously for more than 1 second.
The audio alarm will be activated again when the battery reaches low
status for reminding that the UPS output power will be soon cut off.
If the audio alarm during the bypass mode is too annoying, it can be
muted by pressing the OFF button continuously for more than 1 second.
This action doesn t affect the warning and fault alarms.
In any mode, if the warning or fault alarm is too annoying, you can mute
it by press ON less than 0.5 second, and enable it by
press ON less than 0.5 second again. If a new
warning or fault alarm appears, the buzzer will beep again.
You may use the UPS in CVCF mode without the batteries connected. If
the open battery alarm is too annoying, you can mute it via the software.
Alarm Table List
NO. Status Alarm
1 Battery mode Beep once every 4 sec
2 Battery mode with
battery low Beep once every sec
3
Bypass mode
Beep once every 2 min
4 Overload Beep twice every sec
5 Warning active
(see Warning & Fault
Code Table ) Beep once every sec
6 Fault active Beep continuously
7 Button function active Beep once