©2005 Johnson Level & Tool
7
6. Operating Instructions
IMPORTANT:
It is the responsibility of the user to verify the calibration
of the instrument before each use.
Battery Installation
Note:
Always check to be sure that the on/off switch is in the off
position before removing and replacing batteries.
Battery kit:
• “C” alkaline battery box
• Rechargeable battery-pack
1. Loosen the set-bolt and take the battery box apart from the unit,
as shown in fig. a.
2. Put in four “C” batteries (not included) according to the polarity
illustrated in the battery box, and snap the battery box back into
place, as shown in fig. b and c.
3. If using the rechargeable battery-pack, fix the battery-box onto the
unit directly, and tighten the bolt (fig. c).
Bolt
Alkaline Battery
Box
40-6520_6530 4/20/05 4:12 PM Page 7
