13
1) On/Off
“on/off” function will depend on different power supply
condition. Needs setup menu for backlight control and for
auto power off.
In Main Mode
§
Off-Mode
:
If standby active: Scale is in standby mode but there is no
display visible other than mode symbol (no backlight, no
display, no symbols)
If standby not active: scale is completely off
§
On-Mode
:
Scale is in operation and the display shows the
function, that is in use.
In this mode, auto power off function is invalid.
In Battery Mode
§
Off-Mode
: Scale is completely off.
§
On-Mode
: Scale is in operation and the display shows
the function, which is in use. Backlight works based on
setup menu
In this mode, auto power off function is valid. After 5, 10
or 15 minutes, the system shuts off when not in use in
accordance with the setup menu setting.
2) Zero/Arrow-Left (ZERO/LEFT)
Weighing mode: Set scale to zero
Parameter mode: Shift position of digit to the left
3) Tare/Arrow-Right (TARE/RIGHT)
Weighing mode: Tare the scale
Parameter mode: Shift position of digit to the right
4) Gross-Net/Arrow-Down (G/N/DOWN)
Weighing mode: Toggle weight unit gross/net
Counting mode: Toggle weight unit gross, net and pcs
Function mode: To scroll down menu selection
Parameter mode: Reduce digit value by 1
5) Function/Arrow-Up (Fn/UP)
Weighing mode: Switch the scale from normal weighting
mode to application setup mode
Function mode: Scroll up in menu selection
Parameter mode: Increment digit
6) Print/Enter (PRINT/ENTER)
Weighing mode: Print key
Function mode: Scroll level up in menu mode/confirm
menu selected.
Descriptions of the Keys
Tare Gross
Net
+/-
Fn
Function
Gross
Net
Tare
Zero
0
Enter
EXCELERON
