Accufast P4, User Manual And Operating Manual

Page: 7 / 30

7
3. Unpack and Set Up
Clear a work space on a flat table and inspect all cartons for obvious
shipping damage.
Note
Report any signs of shipping damage to the carrier immediately.
Open the Printer carton and remove the printer and accessory box.
Belt Tracking
Adjustment
Screw
Feeder
Mounting
slots
Encoder
Shipping
Knob
The input end of the P4 is
pictured at right. Remove
the Encoder Shipping Knob
first. This knob holds the
spring loaded encoder
wheel away from the trans-
port belt in shipping. The
machine will not print with
this knob in place.
Open and remove the feeder. Typically, the small card feeder is the most
used and should be installed first. Both small and large (Fx) feeders will
be covered in this manual. If other feeders are used, their operation will
be covered in a separate annual and they will derive power from a differ-
ent source.
Remove shipping materials from the printer. In addition to the knob,
there are several bits of foam and packing material under the cover, be-
tween the cover and the belt and ink jet pen stalls.
Re-inspect for shipping damage that may have been hidden from outside
the carton.