AccuEnergy AcuMesh, User Manual

Page: 12 / 23

V: 1.2 Revised: 22-12-2017
Wireless RS485 Network
The AcuMesh-L has two buttons; Reset and Restore Default. The Restore Default button
will restore the default settings of the transceiver when pushed 4 times consecutively.
When connecting the AcuMesh to a Accuenergy meter or other meter or device through
• Baud rate: 9600
• Parity: None1 (Or Parity None, stop bit 1)
-
other devices in the network.
2.3 AXM-MESH MODULE
The AXM-MESH module is directly powered by the Acuvim II series meter that it is connected
to.
Other IO modules should be connected to the back of the AXM-MESH module.
the following settings to communicate:
• Protocol 2: Mesh
as followed:
Make sure you are in the 'Setting' mode. To get to this screen, press the 'H' and 'V/A' buttons
simultaneously; the display selection mode will be activated and the screen should become
-
ting'. Press 'V/A' to enter the 'Setting' mode.
www. .com
information@itm.com 1.800.561.8187