42
AcuDC 200 Series
The eighth screen: Energy clear page. It
displays “CLE” and a digit at the same time.
No change will be made if the digit is set to 0.
Energy will be reset after pressing V/A if the
digit is set to 1.
The ninth screen: Backlight "ON" time setting
page. The LCD display backlight will turn "OFF"
after inactive for a period of time to conserve
energy. The "ON" time can be set from 0 to
120 minute. The backlight will always be "ON"
if the setting value is 0. As in fig 3.16, the setting
time of the backlight is 5 minutes. The backlight will automatically turn "OFF" if no
key activation within 5 minutes.
Fig 3.16 Back light “ON” time
Fig 3.15 Energy clear page
Kwh
Fig 3.17 Voltage Hall Effect Sensor setting
The tenth screen: only when the meter voltage
wiring is via voltage Hall Effect Sensor, there
will be this screen. Otherwise, there is no such
screen. The voltage input range is 0~1200Vdc.
Fig 3.17 shows the voltage input is 1000V.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
