ii
Installation, Operations & Maintenance Manual
IMPORTANT SAFETY INSTRUCTIONS
WHEN INSTALLING, CALIBRATING, OR OPERATING THIS ACTUATOR, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED TO REDUCE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL
INJURY. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY.
Read all instructions before installation, calibration, or operation.
GENERAL SAFETY CONSIDERATIONS
• Read this manual carefully.
• Installation, calibration, and maintenance should be performed by trained and qualified personnel.
Personnel should be familiar with the precautions required in working with hazardous voltages which
exist inside the actuator. Personnel should also be adequately trained on any hazards inherent in the
chemicals used in the metering pump.
• Always wear protective clothing including gloves and safety glasses when working on or near chemical
metering pumps.
• Follow directions and warnings provided with the chemicals from the chemical manufacturer. User is
responsible for determining the hazards associated with the chemicals being pumped and using the
proper safety gear and procedures.
• Hazardous voltages are present when cover is removed. Disconnect power when installing or servicing
this unit.
• Unit must be properly grounded.
• Conform to local codes in wiring this equipment.
• Actuator must be adequately rated if it is to be used in a hazardous location. See product data plate
for rating information. This rating must not be exceeded under any circumstances. To prevent ignition
of hazardous atmospheres, cover must be tight while circuits are energized.
• In order to comply with the requirements of agency approvals (see data plate), specifications for
conduits connections, wire gauge and type, fastener torque ratings, and operating condition must be
adhered to.
