Instruction Manual - Baldwin 4-4-0 1:20.3 Scale, Live Steam
3. The locomotive is firmly taped to a ½” wood
board which is then fastened to the metal
case with 4 M6 bolts. Bolts must be removed
before lifting the locomotive with wood board
from the metal case.
4. Place taped locomotive on a flat surface.
Carefully cut the tape along the wood board
side surface. Be sure to cut both sides of
the wood board. Slowly lift the tape from the
locomotive. Be very careful with small parts.
Tape cannot be re-used to re-pack the model.
Use new packing tape if necessary.
Unpacking Baldwin 4-4-0
Accucraft Trains locomotives are fine scale
brass models with small parts. To provide
maximum protection from shipping damage,
we carefully pack the models in metal cases.
We ship via UPS with insurance coverage to
its full value. Please contact UPS if package
is damaged.
Each locomotive is packed under UPS guide-
line for shipping. We do not warrant any dam-
age resulted from re-packaging by any party
other than Accucraft Trains.
Please read the following directions before
unpacking your locomotive.
1. Remove foam around the locomotive.
Slide the inner box cover to the side, and
open the inside cardboard box with a cutting
knife.
2. Lift the metal case from the cardboard
box.
Page 6