Accucold SPRF56, User Manual

Page: 5 / 10

5
BEFORE YOUR FIRST USE
Check to ensure all of the following items have been included in the carton box along with this
manual:
1 Portable Refrigerator/Freezer, model number SPRF56 or SPRF86
1 12V Power Cord
1 110V AC/DC Power Adapter
Cleaning Before First Use
After you remove the cooler from its packaging, clean the inside before using. See the cleaning
instruction in the
Cleaning section of this manual.
INSTALLATION
1. Place the cooler on a dry surface where it will be protected from water or moisture.
2. The cooler should not be used where it may be exposed to rain.
3. The cooler should be installed in a position that allows for adequate ventilation.
4. Never locate the unit anywhere the ambient temperature is below 0
°
C (32
°
F) or above 32
°
C
(90
°
F).
Electrical Connection
This cooler can be operated from either a DC or an AC power source. Both require the use of the
12V power cord supplied with the unit. With an AC source, the included AC/DC adapter must be
plugged into the end of the 12V power cord, then connected to the AC power source, such as a wall
socket.
DC Source
The cooler can be operated between 10.3V and 17.5V DC or 22V and 31V DC. Check that the
battery voltage falls within these ranges before connecting the unit. If the voltage is out of range, the
unit will not operate. Excessive voltage could damage the electrical components of the cooler.
AC Source
Be sure to use the AC/DC adapter when your power source is AC, otherwise the cooler could be
damaged.