background image

 

 

 

This  appliance  should be properly grounded for your safety.  The power cord is equipped 
with a three-pin plug that  mates with standard three-prong wall outlets to minimize the 
possibility of electrical shock. 

 

Do not under any circumstances cut or remove the third ground prong from the power cord 
supplied. 

 

This freezer requires a standard 115Volts AC ~ 60Hz electrical outlet with three-prong 
grounded receptacle. 

 

To prevent accidental injury, the cord should be secured behind the appliance  and not left 
exposed or dangling. 

 

Never unplug the freezer by pulling the power cord.  Always grip the plug firmly and pull 
straight out from the receptacle. 

 

Do not use an extension cord with this appliance. If the power cord is too short, have a 
qualified electrician or service technician install an outlet near the appliance. 

 

 

Reversing the Door Swing of Your Appliance 

This freezer has the capability of the door opening from either the left or right side. The unit is 
delivered to you with the door opening from the left side. Should you desire to reverse the 
opening direction, you can refer to the diagram below.  If you have a problem, call ACCUCOLD® 
Customer Service at 

1-800-932-4267

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for FS24L













Reviews: