Accucold AIWD160, User Manual

Page: 15 / 30

15
STARTING THE PRODUCT
1) Water supply hose protection --Do not place heavy objects on the water supply hose leading to the
water supply, or keep the hose from treading.
2) Proper water pressure, water temperature, ambient temperature
3) Please connect only the water you can drink.
Power connection - connect the dispenser to a dedicated outlet.
4) Water supply - open the faucet and let the water supply.
5) Ice making operation - Turn the ICE MAKING-OFF-WASH switch to ICE MAKING
6)
Start ice production -There is a slight difference depending on the ambient temperature and water
temperature, ice starts to be generated from about 3 minutes after starting the ice making operation.
After about 70 minutes, the reservoir will be full of ice. (You can use ice after about 10 minutes.)
BUTTON OPERATION
NOTE: When the FULL light is on. The storage bin is full of ice. (AIWD450 model)
When ERROR occurs
- ICE-WATER-ICE & WATER button will flicker in order and will disappear when restarting after the action against
the ERROR.
Service cycle setting notification (parts check / replacement cycle notification)
- If the motor is running for more than 10,000 hours, the corresponding lamp blinks for 5 seconds in the initial stage
of the ice maker.
- If the motor is operated for more than 11,000 hours, all the buttons will blink for 5 seconds in 1 hour cycle.
※
If all the buttons are flashing, it is a signal to check / replace regular replacement parts and you should contact
the customer service center (paid service).
Failure to check / replace parts may result in higher repair costs.
ICE
- If you turn on the power, this will always come in first. The initial
water subtraction is done three times and then the ICE MAKING
operation is preceded. If you put the cup in the ice exit, you can
discharge the ice for the time set in F1.
WATER
Press the button to light up. If you put the cup on the ice exit, you
can discharge the water for the time set in F1.
ICE &
WATER
Press the button to light up. If you put the cup on the ice exit, you
can simultaneously discharge ice and water for the time set in F1.
ICE MAKING-
OFF-WASH
switch