Accucold ACR82L, User Manual

Page: 7 / 19

7
Installing the Shelves
Shelves and shelf clips (4 clips per shelf) are packed inside the cabinet before
shipment. After choosing the appropriate spacing inside the cabinet, install
shelf clips by inserting the top of the clip inside the pilaster and then press the
lower section of the clip while pushing inwards until it snaps into place. Repeat
until all clips are in the desired location. Place the shelf on clips, checking that
all four corners of the shelf are leveled and supported by all four shelf clips.
Installing the Pressure Valve
1.
Locate the pressure relief valve packed
inside of your appliance.
2.
Locate the hole on the backside. (See
image, right.)
3.
Align the pressure relief valve with the
hole, using the marking as a guide.
4.
Push the pressure relief valve until you
hear a click, this means the valve was
correctly installed.
Connecting the Power Supply
Each unit requires a dedicated circuit to
prevent the malfunction of the compressor
and the electrical components. Each unit
should be connected to its own circuit in
accordance with National Electric Codes and
local ordinances.
NOTE:
DO NOT connect the appliance to a wall outlet with other appliances also
plugged in. DO NOT use extension cords to connect the appliance to the
power outlet.
Plug-in electrical power cord :
Do not under any circumstance cut or remove
the grounding pin from the power cord. Removal of grounding pin invalidates
product warranty.