Page 8
-
Press the red
Stop
button. The Model 9700 will not come on again until
the green
On
button is pressed again.
Machine Adjustments
Blowers:
-
Use
Blower Speed
dial located on electrical panel. Lower numbers
represent lower speed; higher numbers represent higher speed.
Material:
-
To increase material flow, turn the
material feed screw
located at
the rear of the machine clockwise with the hand crank provided. T0
decrease flow, turn the screw counter clockwise.
Agitator / Rotor Speed:
-
Access the
motor positioning screw
through the slot on the side of
the machine beneath the Control Panel using the ratcheting
wrench provided. Speed is increased as belt tension is lowered.
Speed decreases as belt tension is raised. Both agitator and airlock
rotor speed are adjusted proportionally in this manner.
Summary of Contents for 9700
Page 10: ...Page 10...
Page 11: ...Page 11...
