SKYE WiFi 3
TM
Set Up & Installation Manual
ACCU-SCOPE, Inc.
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
- 4 -
Notes and Safety Requirements
Cautions and Notes
1) To avoid danger or damage incurred to the lens, do not touch the lens or sensor
directly with your fingers.
2) To avoid failure or electric shock hazard and so on, do not disassemble or modify
the internal structure of the device.
3) Do not plug in or unplug the USB port when hands are wet.
4) Do not use alcohol and other organic solvents to clean.
5) If the lens or sensor is dirty or damp, it is better to use dry and non-linen fabric or
professional lens tissue to wipe them. To avoid scratches on the surface, do not
touch the lens with your fingers. Wipe the lens or sensor lightly.
6) The products are not designed for outdoor use. Do not expose it to outdoor
environment without any protection. Excessive temperature and humidity will
damage the lens. Please avoid using the product under the following environment:
high temperature or high humidity environment, places with direct sunlight, dirt or
vibration and places near heat source.
7) Please use and store in the following environment:
Operating temperature
：
0
℃
~ 60
℃
Storage temperature
：
-10
℃
~ 60
℃
Operating Humidity
：
30~60%RH
Storage Humidity
：
10~80%RH
8) If any foreign matter, water or liquid enters the device, disconnect the USB cable
immediately. Please send it to ACCU-SCOPE for maintenance. DO NOT use a
hair dryer to dry it by yourself.
9) To prevent microscope from being tripped over or dropped, please put away the
device's USB cables in use or standby.
10) To avoid electric shock by accident, please power off microscope before you move
your computer or laptop.
11) The cleanliness of the device lens will directly affect clarity degree of contents
from the computer screen during preview. Problems like various circles or spots
on the screen may mostly be incurred by dirt on the lens. When cleaning, please
use professional lens tissue or other professional detergent to clear the dirt on the
lens.
