EXM-150 MICROSCOPE SERIES
ACCU-SCOPE
®
9
ADJUSTMENT & OPERATION
(continued)
Recharging the Microscope
The LED cordless, rechargeable microscope is completely
portable and be used indoors or outdoors in any location
where there is no electrical outlet access.
The LED cordless microscope is powered by three AA
1300mAh 1.2v NiMH (Nickel Metal Hydride) rechargeable
batteries, and when used properly can sustain approximately
4 hours (depending on the light intensity/user) before a charge
is required.
Each microscope is supplied with its own 4.5v/1000A line
cord/charger and requires approximately 8 hours for a full
charge. The life expectancy of the rechargeable batteries is
approximately 20,000 hours or equivalent to 400 recharges
before needing replacement.
NOTE:
Your microscope can be used while recharging.
Use
ONLY
the AC adapter/cord that came with your
microscope.
Replacing the Fuse
Turn the main switch to “0” (OFF) before replacing a fuse.
Unplug the power cord from the microscope.
Carefully place the microscope on the back of its arm so the
bottom of the microscope base is facing towards you.
Screw off the fuse holder
①
from the bottom of the
microscope with a flat-head type screwdriver (
—
).
Gently pull out the old fuse
②
and Install a new fuse into the
fuse holder and screw it back into the base.
Specification of the fuse:
250V, 1.0A CAT #3277-1
①
②