EXI-310 INVERTED MICROSCOPE SERIES
ACCU-SCOPE
®
12
Operation
(continued)
Selecting the Light Path
(Fig. 11)
The EXI-310 is outfitted with a binocular viewing head
with one photo port for HDMI/digital imaging. You
must select the appropriate light path for observing
specimens.
The light path is set to 100% to the binocular
eyepieces as the default setting at our facilities where
the light path selection slider
is set to the “OUT”
position (pushed all the way to the right).
Slide the light path selection slider to the left to the
“IN” position. This will send 20% of the light to the
binocular viewing head and 80% to the top photo port
for HDMI/digital imaging and documentation.
For fluorescence units, the light path is configured for
either 100% to the binocular viewing head (
“OUT”
position), or 100% to the top photo port (
“IN” position).
Fig. 11
Light Path
Selection Knob
Light Intensity Ratio
Application
“OUT” Position
100% for binocular observation through
the eyepieces
Dark specimen observation
“IN” Position
20% for binocular eyepieces
80% for top photo port
Observation for digital imaging
and documentation
Light Path
Selection
Slider
