73 Mall Drive
•
Commack, NY 11725
•
www.accu-scope.com
•
Phone (631) 864-1000
•
Fax (631) 543-8900
EXC-400 Microscope Series
SUPPLEMENTAL INSTRUCTIONS
Dual-View Front-to-Back Detailed Set Up
Set-up on a sturdy, level surface with a minimum space requirement of 30(d) x 20(w) inches for the
front-to-back orientation.
Assemble the Main Microscope
– Figure 1
1. Set up the Main Microscope --
EXCEPT
for the Main Viewing Head and Eyepieces -- following the
instructions in the EXC-400 Microscope Series Manual. The Main Viewing Head and Eyepieces
will be mounted after the LED Pointer Unit is mounted.
The assembly of the main microscope includes the objectives, lamp house and the
stage/condenser assembly.
2. Mount the LED pointer unit to the top of the main microscope frame.
3. Mount the Main Microscope Viewing Head on the top of the LED Pointer Unit, then install the
eyepieces.
4. Install the Secondary Viewing Head onto the top of the Secondary Viewing Head Assembly, then
install the eyepieces.
Figure 1
Main Viewing Head
LED Pointer Unit
Secondary Viewing
Head
Main Microscope Frame
