61
Code9:
Indication:
Capture failed, Code: 9, please reboot device to solve this issue.
Solution:
Reboot the system to solve the problem.
(b) Can not switch on the system
Problem:
Can not switch on the system or the system can not work.
Causes:
Power isn‟t connected properly.
Solutions:
Check the power supply of the LED head, make sure the 12V DC
is connect properly. Or Plug the power and link again.
(c) Blur image on LCD
Problem:
Blurred image on LCD or the system doesn‟t work normally
Causes:
The line for data transfer isn‟t connected tightly.
Solutions:
Check and link again.
Make sure the connection is secure/tight.
(Very important)
(d) Right key function
Problem:
Cannot use the right key function of the digital LCD.
Solutions:
1) Use a mouse to operate, just plug a mouse to the USB port of
the LCD.
2) Use the handwriting pen, press for more than 2 seconds, the
system will respond as a right click.
(e) System Stopped or Froze
Problem:
The system stopped or froze, and no response of any operation.
Causes:
Wrong operation or unstable voltage.
Solutions:
1)
Press the “Power Button” for more than 2 seconds,
2) Click the small “Reset” hole with the end of a paper clip(or
other tools that have a small point) to reset your system.
