Introduction
Before You Begin
3
Before You Begin
To protect yourself and your equipment, observe the following warnings and cautions.
WARNING
This product is to be installed in systems operating near locations
where highly combustible fuels or vapors may be present.
Fire or explosion resulting in serious injury or death could result if the
equipment is improperly installed or modified. Serious contamination
of the environment may also occur.
1. Read and follow all instructions in this manual, including all
safety warnings. Install only as described in this manual.
2. To avoid electrical shock, be sure AC power to the monitor is off
during installation.
3. To protect yourself and others from being struck by vehicles,
block off your work area during installation or service.
4. Comply with all applicable codes including: the National
Electrical Code; federal, state, and local codes; and other
applicable safety codes.
5. Do not alter or modify any component or substitute components
in this kit.
6. Substitution of components may impair intrinsic safety. Circuitry
within the sensor and console barrier form an intrinsically safe,
energy-limited system. This system makes the groundwater
sensor intrinsically safe for use in a Class I, Group D hazardous
location. The sensor wiring is intrinsically safe only when
connected to Veeder-Root Consoles.
7. A groundwater sensor should be installed only in wet wells where
preliminary testing has determined that water in the well is not
contaminated, or contaminated water has been remediated and is
now clean.
OFF
