COUNTER OPERATING INSTRUCTIONS Ver. 2.02
Congratulations on your purchase from
Brockie International / Vidir Machine Inc
. This machine is
equipped with an advanced 16-bit microprocessor PLC unit to ensure accurate measurement. To com-
municate with this PLC we have provided a user-friendly interface. Simply enter your commands into the
keypad and watch the machine do the work for you.
Keypad Familiarization
Grey keys- Data entry / Presets / Product
Yellow key- Auto run
Blue key- Carriage control
Red keys- Cutter and cutter safety
Green key- Clears measured length
Password Protection
This unit is equipped with a “Password Protection” feature. Every time the machine is turned off or is un-
used for a designated time the machine prompts the user to
“ENTER PASSWORD”
****
To enter the password: 1. Press
CLEAR
to remove asterisks
2. Type in the four digit security code (Factory preset is “4321”)
3. Press
ENTER
You have now gained access to the machine and may begin to roll, measure and cut the product.
Setting Preset Length
This unit is equipped with a multi-preset feature that enables the user to enter the required length of mate-
rial into the machine’s memory. This will prompt the machine to automatically slow down the rolling proc-
ess approximately one foot before the desired length has been reached. It then slowly rolls to the preset
length.
To enter a preset length: 1. Press
CLEAR
to erase the previous measurement
2. Type in the desired amount of feet & inches
(last 2 digits are inches if imperial or centimeters if metric)
3. Press
ENTER
Your desired length is now entered into the counter. You are now ready to roll and cut the product.
